RING ROLLING

TABLE RING ROLLING - OCTOPUS

The OCTOPUS ring rolling machine developed by Banning® can produce rings with a diameter of up to 500 mm and a height of up to 150 mm with a maximum weight of 75 kg. The OCTOPUS ring roller is available in 3 machine sizes 16 / 25 / 32. The maximum production capacity of this ring rolling machine is 800 pieces per hour. It is possible to produce rings with a square section as well as profile rings. The rolling principle of the OCTOPUS is a continuous rolling; the table supports the 8 working stations (mandrels) rotating continuously around the main roll. The rotation axes of the table and the main roll are eccentric, so that the mandrels, depending on the radial position, move towards and away from the main roll. The ring rolling machine is equipped with a loading carousel and an unloading device.

General technical data

Banning menu points
© 2020 BANNING ® powered by vikkiv-vision.com
Table ring rolling - OCTOPUS
The distance of the eccentric can be dynamically controlled in order to guarantee the position of the outside diameter. This movement creates the radial rolling force. Each working station consists of a lower and upper holding device for the mandrel. The mandrel is fixed in the upper holder. The lower holding device moves up and down during its rotation cycle to allow loading and unloading of the ring on the ring rolling machine. The eight stations are assembled as mobile units rotating around the main roll. Each station is equipped with two centering arms to hold the ring in position during the rolling process and to measure the outside diameter of the ring. The centering force of the centering arms is generated by a cam controlled by a pneumatic piston.
Table ring rolling - OCTOPUS Table ring rolling - OCTOPUS
Mode l
OCTOPUS
Type
16
25
32
Ø m a x. of the ring (mm)
280
355
500
m a x. height of the ring (mm)
80
125
150
m a x. weight of the ring (k g)
10
20
75
rolling force (k N )
160
250
320
loading sys t em
Automat ic
unloading syst em
Automat ic
milling rate (up to rings/hour)
800
Tischwalzwerke - OCTOPUSon top

RING ROLL

TABLE RING ROLLING - OCTOPUS

The OCTOPUS ring rolling machine developed by BANNING can produce rings with a diameter of up to 500 mm and a height of up to 150 mm with a maximum weight of 75 kg. The OCTOPUS ring roller is available in 3 machine sizes 16 / 25 / 32. The maximum production capacity of this ring rolling machine is 800 pieces per hour. It is possible to produce rings with a square section as well as profile rings. The rolling principle of the OCTOPUS is a continuous rolling; the table supports the 8 working stations (mandrels) rotating continuously around the main roll. The rotation axes of the table and the main roll are eccentric, so that the mandrels, depending on the radial position, move towards and away from the main roll. The ring rolling machine is equipped with a loading carousel and an unloading device.
Banning menu points
© 2020 BANNING ® powered by vikkiv-vision.com
Banning ring roll OCTOPUS Banning ring roll OCTOPUS
The distance of the eccentric can be dynamically controlled in order to guarantee the position of the outside diameter. This movement creates the radial rolling force. Each working station consists of a lower and upper holding device for the mandrel. The mandrel is fixed in the upper holder. The lower holding device moves up and down during its rotation cycle to allow loading and unloading of the ring on the ring rolling machine. The eight stations are assembled as mobile units rotating around the main roll. Each station is equipped with two centering arms to hold the ring in position during the rolling process and to measure the outside diameter of the ring. The centering force of the centering arms is generated by a cam controlled by a pneumatic piston.
Banning ring roll OCTOPUS

General technical data

Mode l
OCTOPUS
Type
16
25
32
Ø m a x. of the ring (mm)
280
355
500
m a x. height of the ring (mm)
80
125
150
m a x. weight of the ring (k g)
10
20
75
rolling force (k N )
160
250
320
loading sys t em
Automat ic
unloading syst em
Automat ic
milling rate (up to rings/hour)
800